Detailed Printer Specifications

PrintMaster 850 Series

Print Modes Fast Draft: 530 cps Draft: 400 cps Fast Draft/High Impact: 250 cps High Impact: 200 cps Letter Quality: 100 cps Optical Quality: 65 cps Graphics: 5,000 dps Character Matrix Fast Draft: 9 x 9 cell Draft: 12 x 9 cell Letter Quality: 24 x 18 cell Optical Quality: 36 x 18 cell Printhead 18 wire parallel array. Printhead Adjustment Automatic gap adjustment is standard. Character Sets Fast Draft, Draft and Letter Quality for Epson™ and IBM® Proprinter. Optical Quality for OCR-A and OCR-B. Character Spacing 5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1 and 20 cpi. Line Length 85 characters at 10 cpi. Also software programmable. Line Spacing 6 and 8 lpi. Paper Handling Zero Tear-Off distance; paper out/paper jam detection; fanfold, continuous forms, edge punched. Continuous Mode Automatically loads paper from another tractor if paper out condition occurs. Only available in model 852si. Operator Controls Normal Operating Mode: Online, Form Feed/Load and Form Select/Unload. Form Parameters Non-volatile memory for ten forms, each supporting settings for: tractor path, cpi, lpi, form length, left and right margins, top and bottom margins, unidirectional printing, slashed or non-slashed zero, language, font, high-impact on/off, form name. Ribbon Cartridge: nylon fabric, mobious loop, approximately 15 million characters. Operating Indicators LED indicates Online/Fault/Setup; 2 x 16 LCD for form selection; on/off line status and error descriptions.   Information Copyright © 2006 Printek, Inc. PHONE: 1-888-211-3400 FAX: 269-925-8539

Power Requirements Voltage: 100 to 250 VAC ±10% Frequency: 50 to 60 Hz Power Consumption: 18W non-printing, 60W printing. Paper Slew Rate Model 850/850si: 6 ips rear feed Model 852si: up to 12 ips bottom feed Paper Width 2.5 to 9.75 inches (6.4 to 24.8 cm). Paper Loading Model 850/850si: Rear feed. Model 852si: Rear feed and straight through bottom feed. Multi-Part Forms Model 850: 1 to 5 parts; 0.025" max. thickness Model 850si/852si: 1 to 9 parts; 0.025" max. thickness Graphics Density 60 to 240 dpi horizontally x 72 dpi vertically. Audible Noise (Draft Mode) 60 dBA. Setup (Automatic Methods) Control panel, pluggable cloning module or remote via Windows program. I/O Buffer 32k. Standard Interfaces Parallel: Centronics compatible. Serial: RS232, 300 to 9,600 baud. Optional Interfaces Ethernet. Software Controls Emulation choice of Printek, Epson FX¨, IBM Proprinter, DEC LA120/210, Genicom ANSI (includes 20 popular bar codes) or Basic Bar Codes (includes Code 39, 2 of 5, Interleaved 2 of 5). Physical Specifications H x W x D: 7"x 18.5"x 17" (17.8 cm x 47 cm x 43.2 cm) Second tractor on model 852si adds 3.5" (8.9cm) to height. Weight: 32 lbs. (16.9 kg) Second tractor on model 852si adds 10 lbs. (5.3 kg) to the weight. Reliability Model 850: MTBF - 10,000 hours on electronics, with 50% duty cycle. Model 850si/852si: MTBF - 10,000 hours on electronics, with 100% duty cycle. Printhead Life: 500 million characters. Warranty: One-year printer warranty, two-year limited printhead warranty when Printek brand ribbons are used; one-year warranty when non-Printek brand ribbons are used. * Note: If you plan to do continuous feed print jobs with any of the PrintMaster 850 Series printers, we recommend that you purchase the optional Paper Guide .